Today I will tell why do I hold down two buttons at once during an elevator ride and one more useful life hack that often helps me out. These two tricks work on almost all brands of elevators, with the exception of older versions, which were installed back in the eighties and nineties. I will not pull, but I'll get straight to the point!
1. Why am I holding two buttons at once? Everything is very simple, so that the elevator reaches the floor I need without stopping. To do this, you just need to hold down the floor button and the door close button and do not let go until the end of the trip. Even if an elevator is called on some floor, it will not stop. I used to do this only when I was in a great hurry, because it is not very good to force people on others. floors to wait too much time, but now, in a difficult epidemiological situation, I use this technique every day. On some elevators, it is enough to hold the buttons in this state for 5 seconds, but for reliability
it's better not to let them go at all. By the way, you can do the same in the elevators of shopping and office centers. But don't overuse :)2. I am sure that everyone who reads this article has encountered such a problem asclosing the elevator door when not needed, for example, when it is necessary to take out a lot of bags from the elevator or, on the contrary, to bring in something bulky, and maybe when too many people come and go. It turns out this problem is easy to solve - just hold down the door opener button for 15 seconds. After this operation, the elevator will not close if there is more than 20 kilograms in it. Even if it is empty, the doors will not close for a whole minute. It is very comfortable! If it was helpful, put your thumbs up!